| 住所 | 〒24540 300 Ringgold Industrial Parkway Danville Virginia USA |
|---|---|
| TEL | 434-483-4304 |
| FAX | |
| URL | http://www.irflex.com/ |
| 最終更新日：2022年03月09日 |
IRflex Corporation is the only U.S. company totally dedicated to the development and manufacture of mid-infrared fibers and devices for wavelength from 1.5 to 11 µm, serving industrial, sensing, defense, medical & scientific research
Optical fibers (with different core/clad diameters) made of extra high purity chalcogenide glass (As2S3) to generate and/or guide mid-wave infrared wavelength from 1.5 to 6.5 micron. Fibers are offered in bare or in short cable assembly with connectors
Optical fibers (with different core/clad diameters) made of extra high purity chalcogenide glass (As2Se3) to generate and/or guide long-wave infrared wavelength from 1.5 to 10 micron. Fibers are offered in bare or in short cable assembly with connectors.
Chalcogenide (As2S3) 3x1 multimode fiber combiner. 3 input fibers to 1 fused output fiber, operation wavelength from 1.5 to 6.5 micron
Chalcogenide (As2S3) 7x1 multimode fiber combiner. 7 input fibers to 1 fused output fiber, operation wavelength from 1.5 to 6.5 micron
IRflex’s Trade Mark registered FC/B® connector achieves nearly full transmission and no reflection at the input face by making use of the Brewster angle feature of transmissive materials.
Optical fibers (with different core/clad diameters) made of extra high purity chalcogenide glass (As2S3) to generate and/or guide mid-wave infrared wavelength from 1.5 to 6.5 micron. Fibers are offered in bare or in short cable assembly with connectors
Optical fibers (with different core/clad diameters) made of extra high purity chalcogenide glass (As2Se3) to generate and/or guide long-wave infrared wavelength from 1.5 to 10 micron. Fibers are offered in bare or in short cable assembly with connectors.
Chalcogenide (As2S3) multimode fiber combiners. 3 or 7 input fibers to 1 fused output fiber, operation wavelength from 1.5 to 6.5 micron
IRflex’s Trade Mark registered FC/B® connector achieves nearly full transmission and no reflection at the input face by making use of the Brewster angle feature of transmissive materials.
Hollow-core fiber with anti-resonant arches is designed and made of chalcogenide glass As2S3. The thickness and spacing between the arches are selected respectively to minimize the fiber transmission loss <0.1dB/m for CO2 laser between 9 to 11 micron, CO laser around 5 micron or Er:YAG laser around 3 micron.
